Improvement: surface fan-curve calibration coverage prominently – only ‘CURVES 1/4’ are measured, so 3 of 4 fans report nameplate estimates (fan % x rating); th

WHAT: Kit Learning / Calibrate show ‘CURVES 1/4 CURVES’ – only one of four fan ducts has a measured airflow curve; the others fall back to nameplate (fan % x rating), which the cockpit hints at (‘IN cfm may be Learning-allocated or still nameplate – dashed paths need Learning’). The Overview/Climate CFM numbers (e.g. ‘IN 4×8 0 cfm’, ‘Fans 2 CFM’) do not clearly say they are estimates. WHY: an operator reading a CFM figure should know whether it is measured or a nameplate guess – this is the same honesty principle the DLI/energy cards already follow, and it is the root of the tracked ‘-200 CFM under-pressure alarm from a flat calibration’ class. HOW: badge uncalibrated fan CFM as ‘est (nameplate)’ vs ‘measured’, and show a ‘X of 4 fan curves measured’ coverage chip with a link to Calibrate. Found live 8.2.0.