DSC-BRAIN USER GUIDE · REFERENCE

Journal actions and fields

The twenty-one built-in journal actions, what each records, and how reminders key off them.

  verified for 9.0.0 · firmware train 8.2.0.0

  last verified 2026-09-17 · mirrored 2026-09-15

All built-in actions freeze a sensor snapshot. Typed actions exist on plant journals and zone journals (tents and zones you add, such as a cure fridge); room and Core take notes and photos.

Action Typical fields Used by
Note Free text
Water Litres, pH, runoff pH Water reminders; the probe's fast-reading window; the Dryback chart
Feed Litres, EC, pH, runoff EC, runoff pH, mix / product Feed reminders; Need vs EC target; the entry summary adds runoff minus input (e.g. runoff EC +0.6 vs input) when both halves are logged
Flush Litres, runoff EC
Transplant Pot size, medium Plant medium
Defoliate Leaves removed Trends around the event
Train Method
Top / prune Nodes topped
Flip to flower New photoperiod (h) Flip date and the harvest window when no operator date is set
Pest / issue What was seen, treatment
Harvest Wet / dry weight Grow record archive; strain runs
Weigh-in Weight g, what (zone journal) Dry run weight curve
Dry check Stem bends / snaps, weight g Dry run end check
Jar up Jar (jar1…jar12), weight g, batch Cure card settling and batches
Burp Jar, jar RH before %, open for minutes Cure card settling
Source water test EC, pH, temperature Mix panel; source water reminders
Reservoir mix Litres, EC, pH, strength %, recipe Mix panel checks and draw-down
IPM scout Sticky traps, pressure, pests Turnover procedure; weekly IPM reminder
Sanitation Product, dwell minutes Dry room ready and turnover procedures
Quarantine check Finding clean / suspect / found, what Quarantine procedure (found restarts the clock)
Procedure Procedure, outcome Written when a procedure closes

Custom actions

A custom action has an id (lowercase letters, digits and underscores), a label, an icon, typed fields (number, text or choice) and whether it snapshots (off unless set). Custom ids cannot shadow a built-in. This release has no editor for them in the dashboard: they are saved through the brain API (PUT /journals/actions), and the plant journal's entry composer then lists them with the built-ins.

Reminder matching

A reminder counts only the same action in the same scope. Feed every 5 days on plant 2 is reset by a Feed entry on plant 2, not by a Water entry, and not by a Feed on plant 1.

DSC-Brain user guide · Journal actions and fields · this page is edited on the site; the Notion original was retired after the mirror