DSC-BRAIN USER GUIDE · CONTENTS
Troubleshooting
Start with the five-minute checklist, then the page for your symptom.
● verified for 9.0.0 · firmware train 8.2.0.0
● last verified 2026-09-17 · mirrored 2026-09-15
● 70 pages · 9 sections
- 01Troubleshooting — where to start
A first-five-minutes checklist and a symptom index pointing at the right page. - 02Cannot reach the dashboard
Address checks, hotspot vs LAN, .local resolution, the two-minute restart window, and SSH checks. - 03Hub offline or not reporting
What the room does while the hub is dark, reading the link chips, Wi-Fi and fallback-hotspot causes, and when a takeover is what you are seeing. - 04Probe dark or faulted
Probe not reporting vs channel fault vs out of service; what steering does meanwhile; power, Wi-Fi, cable and calibration checks; judging a probe by its watering response. - 05Plugs and appliances — not reporting, mismatch, ineffective
Sonoff plugs on the home LAN, the appliance driver, relay mismatch and ineffective alerts, min-off confusion, and the AC / mister that have no actuator. - 06Readings held or stale
Why a value is HELD, the horizons involved, sensor fault and stuck alerts, DHT disagreement, and rejected readings. - 07Lamp and photoperiod surprises
Lamp on in the dark period, lamp off in the window, catch-up turning it on, hub clock invalid, the 4×8 the hub cannot see, and lamp plugs holding state. - 08Zigbee radio down or pairing fails
RADIO DOWN, MQTT OFFLINE, crash-looping coordinator, the wrong stick firmware (Thread vs Zigbee), permit-join not taking, and why not to wipe the pairing database. - 09Tuya device will not connect
Err 901 / 914 with an open port means another controller owns the socket; what not to do; key, version and IP checks. - 10Camera shows no frame
Test source first; USB passthrough and the wrong video node; ffmpeg missing; credentials; motionEye ports; lights-on only. - 11Updates and firmware jobs fail
Check refused (no Ethernet), toolchain refusals (pin, disk, running job, helper missing, secrets), canary failed or unconfirmed, a seat stuck in the queue, and rolling back. - 12Brain overloaded — slow dashboard, hub rebooting
Too many open dashboards can saturate the brain and starve the hub link; how to see it in the logs, and what to do. - 13Known limitations and honest out-of-service
Things the kit tells you it cannot do on this release, and why they are shown rather than hidden.
DSC-Brain user guide · edited on this site · Troubleshooting
